Drolet Spark II Wood Stove - DB03401

Call for availability
Drolet   | Authorized Dealer |  SKU: DB03401
Build Your Custom Package
Contractors & Builders: Contact us for special pricing & volume discounts
No sales tax (except NY)

Sale price$1,175.00


Drolet Spark II Wood Stove - DB03401

Amongst the most compact on the market, our Spark II wood stove can heat ​​up to 1,200 ft² with a maximum heat output of 45,000 BTU/h. Non-catalytic and EPA certified at 1.8 g/h, this model can efficiently heat small spaces. The bottom of its combustion chamber is deeper than other models in its category and allows a greater accumulation of ashes, and thus to be able to empty them much less frequently. Packaged in a rigid cardboard box for ease of transport, this appliance requires simple assembly.

Included: steel legs, air deflector, ceramic glass, cast iron door with adjustable hinges, ash lip, air damper


Heating area 250 - 1,200 Ft2
Size 18 1/2" W X 28 7/8" D X 28 3/4" H
Maximum log length 17"
Average particulate emission rate
1.8 g/h

  • Up to 5 hours burn time
  • Up to 17" logs
  • 1.55 ft³ firebox
  • EPA certified
  • Proudly made in Canada
  • Limited lifetime warranty
  • Certified for mobile home and alcove installation


General Features:

Combustion technology Non-catalytic
High-efficiency certified appliance Yes, EPA 2020 approved
Maximum log length 17"
Log positioning Loading over depth
Chimney diameter 6"
Flue outlet diameter 6"
Type of chimney CAN/ULC S629, UL 103 HT (2100 °F)
Minimum chimney height (feet) 12'
Baffle type High quality vermiculite
Approved for an alcove installation Yes
Approved for a mobile home installation Yes, with fresh air intake
Shipping Weight 230 lb
Door type Single, glass with cast iron frame
Glass type Ceramic glass
Glass surface – dimensions (Width X Height) 10 1/4" X 8 1/2"
Glass air-wash system Yes
Overall dimension (Height) 28 3/4"
Overall dimension (Width) 18 1/2"
Overall dimension (Depth) 28 7/8"
Door opening – dimension (Height) 7 5/8"
Door opening - dimension (Width) 12"
Firebox – dimension (Height) 11 3/4"
Firebox – dimension (Width) 14 1/4"
Firebox – dimension (Depth) 19 1/8"
Firebox lined with refractory bricks for better heat distribution Yes
Stainless-steel secondary-air system improving gas combustion Yes
Steel thickness – body 3/16"
Steel thickness – top 1/4"
USA standard (emissions) EPA
Canadian Standard (emissions) CSA B415.1-10
USA standard (safety) UL 1482, UL 737
Canadian standard (safety) ULC S627
Tested and listed as per applicable standards By an accredited laboratory (CAN/USA)
Warranty Limited lifetime


 Appliance Performance:

Fuel type Dry cordwood (16" recommended)
Recommended heating area(9) 250 - 1,200 ft²
Overall firebox volume 1.8 ft³
EPA loading volume 1.55 ft³
Maximum burn time(9) 5 h
Maximum heat output-dry cordwood(4) 45,000 BTU/h (13.19 kW)
Minimum overall heat output rate(4) (5) 12,124 BTU/h (3.55 kW)
Maximum overall heat output rate(4) (5) 26,700 BTU/h (7.83 kW)
Average overall efficiency-dry cordwood (HHV)(5) (6) 74 %
Average overall efficiency-dry cordwood (LHV)(5) (7) 79 %
Optimum efficiency(1) (2) 80 %
Optimum heat transfer efficiency(8) 79 %
Average particulate emission rate(3) 1.8 g/h
Average CO(10) 74 g/h
Size Small
Maximum log length 17"
Shipping weight 235 lb (107 kg)
Overall dimension (Width) 18 1/2"
Overall dimension (Height) 28 3/4"
Overall dimension (Depth) 28 7/8"
Warranty Limited lifetime
Alcove installation approved Yes
Mobile home approved Yes, with fresh air intake
Certified according to applicable standards By an accredited laboratory (CAN/USA)
Premium quality blower included (CFM) Optional
Combustion technology Non-catalytic

(1) This appliance is officially tested and certified by an independent agency.

(2) Values are as measured per test method, except for the recommended heating area, firebox volume, maximum burn time and maximum heat output.

(3) The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³ and reloading intervals ranging from 60 to 120 minutes. Other performances are based on a fuel load prescribed by the standard without any reloading between start and finish. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.

(4) As measured per CSA B415.1-10 stack loss method.

(5) Higher Heating Value of the fuel.

(6) Lower Heating Value of the fuel.

(7) Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.

(8) Optimum overall efficiency at a specific burn rate (LHV).

(9) The optimum heat transfer efficiency is for the low burn rate (using HHV) and represents the appliance’s ability to convert the energy contained in the wood logs into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.

(10) Carbon monoxyde.


  Single wall pipe Double wall pipe
Clearance – back wall 12" 6"
Clearance - corner 11" 7"
Clearance – side wall 18" 18"
Clearance – top (measured from the platform on which the appliance is installed)** 84" 84"


Payment & Security

Found a Better Price? We'll Price Match!

📞 (866) 412-1837



InnovDepot is an authorized dealer for kitchen & appliance home brands. If you're a contractor or builder, fill out our quote form to build your custom packages and get your personalized discount down below!

Customer Reviews

Based on 9 reviews
N. Cornell
I rarely give 5 stars for my reviews, but this product deserves it.

I have used wood stoves as heaters for about 17 years now, and this stove works excellently. In fact, I'm surprised at how effectively the stove burns wood, producing significantly less chimney smoke and ash residue than my old stove. I also really like the glass staying clean so can enjoy my coffee in front of the fire.

M. Peter
Really awesome woodstove

The stove is my only heat source for my 1,200 sf home, and it does a GREAT job. Additionally, because it has a flat surface, you have space to heat a kettle of water on top. I really liked this stove's appearance, durability, and size. It appeared adequate for my needs.

Elroy Willoughby
Worth buying!

This stove is rated to heat 1,200 square feet with a burn time of 5 hours. With the blower I bought separately, it heats not just my living room, but also reaches my kitchen. The door is sealed when closed. And the stove has more than 5 hours burn time. With dry, dense wood I can count on it for 6-8 hours of burn. Everything I paid for, the blower, installation, and the wood stove itself are all worth it.

Claudette Hamilton
EVERYTHING about this stove is great!!!

small but mighty We bought this wood stove for a little room we added onto our house. It looks fantastic and fits perfectly. The huge window shows off the burning wood. Beautiful! It burns effectively as well! My husband agrees with me that we made the perfect choice. Worth every bit of the investment. If we ever needed another one, we would purchase it once more! We are HAPPY and WARM! :)

Winston M.
Stove damaged

The first item came damaged, the box was broken, and so was the handle. It appears that the delivery men neglected to take care of it during shipment. I called the customer service as soon as I saw the damage, few days later, they sent me a new one. I am very pleased with the replacement. Very good looking and working great too.

You may also like